Techniques for Broken Garage Door Springs

When you have a malfunctioning garage door with broken torsion springs that need to be treated as soon as possible. You can either call a professional garage door company like; Pittsburgh garage door spring repair service to deal with it or you can do it on your own.

These are long, heavy, and highly tensed springs that are used to lift or lower the garage door by counterbalancing its overall weight. If you have broken torsion springs that need to be treated and you want to handle them on your own, the following are the simple steps that you can follow to get the job done.

First of all, you need to remember that you have turned off the power to the garage door so you do not get electrocuted while performing the job. Make sure that you have disconnected the power cord of the garage door opener. This rule is applied to the newer versions of garage doors as with the older models you may need to turn off the circuit breaker or remove the fuse to disconnect the power.

Look closely at the broken spring and the new one to confirm that they are both the same. Make sure that they are the same size, length, and inside dimensions. While picking the spring during the project, avoid grabbing them by each other. Don’t touch the winding cones of new springs. Take a marker or any other writing instruments to mark the torsion shaft ends. It is extremely important because it helps you to determine that you have a balanced garage door when you have finished the job of removing old springs and installing a new spring.

Wind the old but unbroken spring off and then unfasten the screws and bolts that securing the torsion cones and spring metal brackets together. Afterward, remove the bolts securely.

After completing this process, it is time to replace the springs along with re-installing the new hardware. After doing this, it is the right time to wind up the new torsion springs. Once you have finished this process, you need to make sure that the garage door is properly aligned and balanced. In order to reduce the friction on the garage door, you will have to apply a lubricant.

Once you have confirmed that your garage door is aligned properly and all the hardware is tightened securely, it is time to reconnect the garage door opener. Open and close the garage door few times to make sure that it is working properly. It is easy and convenient to replace the broken springs on your own but you have to follow all safety measurements because it can be a risky job if not done properly. You may lose your limbs, hands, fingers, or even life.

The garage door is an important piece of equipment for the safety and protection of your family and home. Call professional and certified garage door repair technicians if you need to replace the broken garage door springs.